How to COMPLETELY de activate mark x TRC + VSC

Hi.

All mark x first gen with Traction Control TRC and Vehicle Stability Control VSC are discussed here.

First, simple understanding of these funtions: TRC helps in avoiding the wheel spinning in a straight line. VSC keeps the car from going sideways. more details you can check on google.

As we all know that these systems come with a button which is used to deactivate TRC it is to be mentioned here that on TRC can be deactivated, you cannot deactivate the VSC. And TSC cannot be deactivated fully. The TRC will produce a beep sound if the and disconnect the power supply to the car if car starts burns a lot.

For this you can the following steps:
1. Ignition should be off.
2. Shift lever position at P.
3. Parking brake disengaged.
4. Start the engine.
5. Operate the following steps 6 to 16 within 30 seconds after engine start:
6. Engage the parking brake.
7. Fully depress and release the brake pedal. Make sure that the brake pedal is fully released.
8. Depress and release the brake pedal again.
9. Disengage the parking brake.
10. Fully depress brake pedal and keep it depress while going to the next step.
11. Engage and disengage the parking brake. While holding down the brake pedal.
12. Engage and disengage the parking brake again. while holding down the brake pedal.
13. Release the brake pedal.
14. Engage the parking brake.
15. Fully depress the brake pedal and then release.
16. Fully depress the brake pedal and then release.

Your instrument panel should indicate the bright yellow light...one symbol of car with skid marks trc off warning and one saying VSC vsc off warning.
Floor your vehicle and feel the raw power and have fun now...but please not on public roads o r in traffic.

To revert back to original settings, just restart your car. Thanks