What Should You Do If the Power Window Switch in Your Suzuki Cultus Stops Working?

Home > Gari Forums > Suzuki Forums > Suzuki Cultus Forums > Suzuki Cultus Power Window Issues Forums

What Should You Do If the Power Window Switch in Your Suzuki Cultus Stops Working?

If the power window switch in your Suzuki Cultus stops working, it could be due to several factors. How can you identify whether the problem lies with the switch itself, the wiring, o r the window motor? What steps should you take to fix the issue, and how can you avoid the need for frequent switch replacements?

Gari Specialist asked on 09 Apr 2025 11:24:33 am

1 Answer

18 views |

Gari Master - on 09 Apr 2025 11:30:20 am

If the power window switch in your Suzuki Cultus stops working, it could be due to several factors. Heres how you can troubleshoot and fix the issue:

Check the Fuse: First, check the fuse for the power windows. A blown fuse can prevent the switch from functioning. Replace any blown fuses and see if the window operates again.

Test the Switch: If the fuse is fine, the issue could lie with the switch itself. To test the switch, you may need to remove it from the door panel and use a multimeter to check for continuity. If there is no continuity when pressing the switch, it’s likely faulty and will need to be replaced.

Inspect the Wiring: If the switch is not the problem, inspect the wiring leading to the switch. Look for any loose, frayed, o r damaged wires. Damaged wiring can cause the switch to fail by interrupting the electrical signal.

Check the Window Motor: If the switch and wiring are functioning correctly, the issue may be with the window motor. A failing motor may not respond to the switchs input, causing the window not to move.

How to Fix:

Replace the Fuse: If the fuse is blown, replace it with a new one of the same amperage.

Replace the Switch: If the switch is faulty, replace it with a new one.

Repair Wiring: If there are any damaged wires, repair o r replace them.

Check the Motor: If necessary, have the window motor inspected and replaced if faulty.